Ambient Weather Station Manual. Weather station glossary of terms; Web the ambient weather wh31l lightning detector includes the following:
AMBIENT WEATHER WS0900IP USER MANUAL Pdf Download ManualsLib from www.manualslib.com
During the rcc time reception period (maximum 10 minutes), no weather data will be transmitted to avoid interference. • verify proper operation of the indoor and outdoor humidity. Press the set key to adjust the indoor temperature.
Web Ambient Weather Weather Station Manuals.
Indoor temperature calibration (default is measured indoor temperature). Place the nut in the hexagon hole on the sensor array, then insert the screw in other side and tighten it with a precision screwdriver. The worst case sensor accuracy should be within 10% (the accuracy is ± 5%).
Web The Ambient Weather Wh31L Lightning Detector Includes The Following:
The console receives wireless wind speed, direction, rainfall, temperature, humidity, uv and solar radiation from the outdoor. Press the + key again to toggle the temperature units from celsius to fahrenheit. Web up, the sensor will transmit weather data for 30 seconds, and then the sensor will begin radio controlled clock (rcc) reception.
Ensure The Pole And Sensor's Indicator Align.
The following user guide provides step by step instructions for installation, operation and troubleshooting. To download the latest manual and additional troubleshooting tips, please visit: Figure 2 displays all four switches in the off position (factory default setting).
While Some Stations By Ambient Are Similar, Make Sure You’re Picking The Right Ambient Weather Station Manual As There Are Some Small Differences.
The following user guide provides step by step instructions for installation, operation and troubleshooting. Before inserting the batteries, locate the dip switches on the inside cover of the lid of the transmitter. Press the set key to adjust the indoor temperature.
Weather Station Glossary Of Terms;
No part of this manual may be reproduced without written authorization. Insert the top side of the pole to the square hole of the weather sensor. Web remove the battery door on the back of the sensor by removing the set screw, as shown in figure 1.
